STANDING SEAM ROOFING
Standing Seam metal roofing is one of the oldest and most practical roofing solutions. Its classical look enhances the roofline of virtually any architectural style. Once installed, its dramatic shadow lines run continuously from ridge to eave, accenting the pitch and plane of every roof angle. Our Standing Seam panels can be ordered in a variety of styles, with more than two dozen Cool Roof color choices or elegant bare metals.
(SNAP LOCK)
T hese Titan Standing Seam panels overlap at the seam, snap and lock into place. Select the seam height, panel width and options best suited to your job. Click on the architectural color selection chart for available finishes, but please request an actual metal sample for final paint and color selection.
TITAN SL-100 SNAP LOCK
- Seam Height: 1
- Standard Panel Widths: 12, 16
- Minimum Slope: 3:12
- Optional Items: Stiffening Ribs or Striations
- Approvals:Please ask a CBM Representative
Common applications:
- Residential
- Light Commercial
This panel is recommended for roof slopes greater than 3:12 roof pitch. Stiffening ribs or striations are recommended, but optional.
Features:
- Can be roll-formed on the jobsite to eliminate damage and waste
- Built-in concealed fastener system
TITAN SL-1750 SNAP LOCK
- Seam Height: 1.75
- Standard Panel Widths: 14, 18
- Minimum Slope: 3:12
- Optional Items: Stiffening Ribs or Striations
- Approvals: Please ask a CBM Representative
Common applications:
- Residential
- Commercial
- Public Works
This panel is recommended for roof slopes greater than 3:12 roof pitch. Stiffening ribs or striations are recommended, but optional.
Features:
- Can be roll-formed on the jobsite to eliminate damage and waste
- Concealed
fastener system
TITAN SLZ-1000 SNAP LOCK
- Seam Height: 1
- Standard Panel Widths: 13, 17
- Minimum Slope: 3:12
- Optional Items: Stiffening Ribs or Striations
- Approvals: Please ask a CBM Representative
Common applications:
- Residential
- Light Commercial
This panel is recommended for roof slopes greater than 3:12 roof pitch. Stiffening ribs or striations are recommended, but optional.
Features:
- Can be roll-formed on the jobsite to eliminate damage and waste
- Concealed
fastener system
The above panel illustrations are renderings only. The actual striations and/or ribs may have different dimensions. Both of these options help to reduce oil canning. Note that oil canning is not a cause for rejection.
Titan Mechanical Standing Seam panels feature a seam thats mechanically locked into place, providing the highest degree of strength. They are available in a range of panel widths with varying seam heights; select the seam height, panel width and options best suited to your job. Click on the architectural color selection chart for available finishes, but request an actual metal sample for final paint and color selection.
For more details and to compare features, options and benefits of our Standing Seam metal panel systems see the fact sheet downloads in PDF format.
TITAN CB-2000 MECHANICAL SEAM
- Seam Height: 2
- Standard Panel Widths: 14, 18
- Minimum Slope: :12
- Optional Items: Stiffening Ribs or Striations
- Approvals: Please ask a CBM Representative
Common applications:
- Residential
- Commercial
- Public Works
This panel is recommended for roof slopes as low as :12 roof pitch. Stiffening ribs or striations are recommended, but optional.
Features:
- Can be roll-formed on the jobsite to eliminate damage and waste
- Concealed fastener system
TITAN CB-150 MECHANICAL SEAM
- Seam Height: 1.5
- Standard Panel Widths: 12, 16
- Minimum Slope: 1:12
- Optional Items: Stiffening Ribs or Striations
- Approvals: Please ask a CBM Representative
Common applications:
- Over solid decks or spaced purlins
- Residential
- Commercial
- Public Works
This panel is recommended for roof slopes as low as 1:12 roof pitch. Stiffening ribs or striations are recommended, but optional.
Features:
- Can be roll-formed on the jobsite to eliminate damage and waste
- Concealed fastener system
TITAN CB-100 MECHANICAL SEAM
- Seam Height: 1
- Standard Panel Widths: 13, 17
- Minimum Slope: 1:12
- Optional Items: Stiffening Ribs or Striations
- Approvals: Please ask a CBM Representative
Common applications:
- Residential
- Light Commercial
This panel is recommended for roof slopes greater than 1:12 roof pitch. Stiffening ribs or striations are recommended, but optional.
Features:
- Can be roll-formed on the jobsite to eliminate damage and waste
- Concealed fastener system
The above panel illustrations are renderings only. The actual striations and/or ribs may have different dimensions. Both of these options help to reduce oil canning. Note that oil canning is not a cause for rejection
Often a home or commercial project can be enhanced by the natural look of bare metal rather than a coated color. We offer all our product profiles in copper, Rheinzink and bare Zincalume for a traditional metal look. In true copper, these products develop a natural patina over time. There are no reflective or emissive properties to these products.
Copper products come with a lifetime warranty; bare Zincalume has a 20-year warranty.
